System Operations Improvements
Skip to:
Introduction
Operational flexibility is the ability of a power system to respond to changes in electricity demand and generation. Operational flexibility is a prized characteristic in power systems, particularly those with significant variable renewable energy (RE). While system operators have many tools at their disposal to unlock flexibility (e.g., flexible generation, transmission, storage, demand response, and power markets), changes to system operational practices are among the most readily accessible interventions. Well-designed system operations help to extract flexibility from the existing physical infrastructure and can often be implemented at lower economic costs than options that require changes to the physical power system.
For example, adjusting day-ahead generation scheduling practices to allow changes closer to real time allows dispatch decisions to be made based on improved forecasts of both variable RE output and demand. This decreases the need for expensive reserves and allows more accurate and efficient market operation.
Other examples of institutional and operational sources of flexibility include:
-
Expanding a power system’s balancing area to provide access to geographically diverse wind and solar resources and diverse demand;
-
Improving wind and solar forecasting; and
-
Increasing thermal plant cycling capability.
Example Interventions
System operations can be improved to facilitate integration of variable RE through the following actions:
- Expand sub-hourly dispatch and intra-hourly scheduling. Shorter intervals allow for a more efficient response from grid operators as load forecasts and variable RE forecasts are more accurate closer to dispatch.
-
Improve weather, wind, and solar forecasting, for example, by:
-
Utilizing more accurate data;
-
Calibrating the forecasts against actual experience to identify forecasting errors; and
-
Enabling system operators to use forecasts frequently to inform commitment and dispatch decisions.
-
[See also: Forecasting]
-
Take advantage of geographic diversity of variable RE resources to smooth variability by expanding the balancing area footprint and/or coordinating with other balancing areas.
-
Update grid codes to incorporate requirements for wind turbines to provide active power controls, such as fault ride-through, reactive power, and potentially automatic generation control, inertial response, and primary frequency response. An assessment of whether these services can improve reliability and are economical is a necessary pre-requisite.
-
Explore market changes that may better enable cost effective procurement of balancing services that help maintain reliability.
-
Explore strategic curtailment of wind and solar. While curtailment will decrease total generation from variable RE, it may contribute to an economically optimal amount of flexibility.
Reading List and Case Studies
Network Planning and Pricing to Support Net-Zero Transition
Women in Power System Transformation, 2022
This topic revisits current practices in network pricing across transmission and distribution (T&D) systems. The Great Britain system is used as an example to illustrate key differences in principles between T&D systems, evolution over time to accommodate growing variable renewable generation, impact on network users at different locations, and differing generation technologies. Ongoing reforms to harmonize pricing across transmission and distribution are highlighted. This material consisting of recorded lectures, supporting lecture slides, and student exercises/assessments can be downloaded from the Global Power System Transformation Consortium website.
Declining System Inertia and Dynamic Reserve Requirements
Women in Power System Transformation, 2022
This topic covers the impact of declining power system inertia due to rising shares of inverter-based resources (IBRs) on the grid, determining minimum inertia needs, and methods to monitor and maintain sufficient inertia. The important interplay between system inertia and frequency control mechanisms is explained to help strike the right balance between minimum inertia and faster / slower frequency response reserves based on the characteristics of individual power systems. This material consisting of recorded lectures, supporting lecture slides, and student exercises/assessments can be downloaded from the Global Power System Transformation Consortium website.
Control Center of the Future Road Map for Peru’s System Operator, COES SINAC
Global Power System Transformation Consortium, 2022
Peru’s system operator, Comité de Operación Económica del Sistema Interconectado Nacional (COES), is embarking on a shift to higher wind and solar energy penetrations in its power system. As its power system undergoes these transformative changes, advanced methods and tools will be required in the COES transmission monitoring and control centers.
To support COES with identifying solutions to these challenges, the Global Power System Transformation (G-PST) Consortium’s System Operator Technical Support Pillar (Pillar 2) worked alongside the COES team to develop a set of possible recommended investment priorities to adapt to more variable generation, as well as shifting energy demand profiles through electrification and increased growth rates. The result of this work offers a comprehensive approach for the implementation of best-in-class structure in all areas of control center operation, informed by high-level assessment of COES functional and capability model.
In this webinar, experts from COES and G-PST’s Core Team partner organization, the Electric Power Research Institute, outline the road map and share insights about the optimal approaches for control center improvements that COES is considering to meet the demands of their future power system. The road map is structured in five key areas: architecture, data, control center tools, human factors, and buildings and hardware, with eleven key pillars of innovation within each area.
Active Power Controls from Wind Power: Bridging the Gaps
National Renewable Energy Laboratory, University of Colorado, Electric Power Research Institute, 2014
This study explores technologies that can provide control of active power output from wind power. The study assesses how active power control technologies impact production costs, wind power revenue streams, and the overall reliability and security of the power system. The authors find that wind turbines have great potential to provide automatic power controls. However, careful market and control system design will be needed to realize these benefits.
Securing Power During the Transition
OECD International Energy Agency, 2012
This report discusses system operations and investment in liberalized electricity markets in which greater variable RE and energy efficiency resources are being deployed. It overviews current and foreseen challenges and possible policy and regulatory solutions to improve the cost efficiency and flexibility of the grid. Chapter 3 (pg. 36) outlines operational challenges associated with significant variable RE penetration.
Meeting Renewable Energy Targets in the West at Least Cost: The Integration Challenge
Western Governors’ Association, 2012
This report, commissioned by the Western Governors’ Association in the United States, provides an assessment of system operational measures that could reduce costs of wind and solar integration to the end-users. The report identifies challenges to adopting these measures and recommendations for action at the state level. Especially useful are the high-level and accessible explanations of these operational measures.
Integrating Variable Renewable Energy in Electric Power Markets
National Renewable Energy Laboratory, 2012
This report summarizes effective actions that countries have taken to integrate significant variable RE. It includes detailed case studies such as how Australia and Spain each developed and integrated advanced forecasting techniques (pg. 49 and 105), and how Spain allowed for larger balancing areas (pg. 104). The report explores additional topics and case studies, including Ireland, Denmark, Germany, and the United States.
Wind Integration: International Experience, WP2: Review of Grid Codes
Australian Energy Market Operator, 2011
This report reviews grid interconnection codes that relate to the performance of wind turbines, as well as requirements that can validate wind farm and turbine performance. Also reviewed are modeling requirements for simulating the performance of wind farms in the power system. Specifically, the authors examine grid codes from the UK, Germany, Denmark, Spain, Texas, Canada, and Europe.
IVGTF Task 2.4 Report: Operating Practices, Procedures and Tools
North American Electric Reliability Corporation, March 2011
This report details case studies of Spain, Germany, Denmark, and several balancing areas in North America and looks at the specific systems operational measures undertaken to integrate variable RE. The case studies examine how systems operators improved their situational awareness, ability to assess real-time reliability and risks, and decision support processes.
Regulatory and Policy Examples
This manual includes the instructions, rules, procedures and guidelines that were established by the PJM regional transmission operator to support operations, planning, and accounting for both the regional transmission system and the PJM energy market.
Network Code on Load Frequency Controls and Reserves
ENTSO-E defines a common set of minimum requirements for the European-wide power system. The requirements include load-frequency control and reserves principles to ensure the operational security of the system and cross-border cooperation between transmission system operators. The requirements may also dictate the characteristics of the grid-connected systems, consumption, and distribution systems. The code addresses the load-frequency structure, operational rules, quality criteria, reserve dimensions and exchange, sharing and distribution, and monitoring.
Network Codes Development Process
European Network of Transmission System Operators for Electricity (ENTSO-E), 2012
This document outlines the process ENTSO-E has undertaken to develop network codes that define security and reliability, connection, third-party access, data exchange and settlement, interoperability, operational procedures in an emergency, capacity allocation and congestion management, trading and related technical and operational provisions, transparency, balancing, harmonizing transmission tariff structures, and energy efficiency. The network codes’ characteristics, the role within the development process, the process itself, interpretation of the rules, and a process for maintaining the codes are included.
Transmission and Dispatching Operations Manual
New York Independent System Operator, 2012
This manual provides detailed guidance for the facilities and controls maintained by the New York Independent System Operator, a regional transmission operator. It includes sections on operations monitoring, transmission operations, scheduling operations, and dispatching operations for all generation types.
Federal Energy Regulatory Commission, 1996
Order 888 mandates that electrical services and marketing functions be disaggregated and requires utilities to provide open access to their energy rate schedules. The order also makes provisions for conventional utilities to recover stranded costs and for transmission owners to offer their services on the open market.